Ubuntu设置为路由器的方法分享

#路由器(有线)
iface eth0 inet static
address 192.168.0.1
network 192.168.0.0
netmask 255.255.255.0
broadcast 192.168.0.255

echo -e "nnLoading simple rc.firewall-iptables version $FWVER..n"
DEPMOD=/sbin/depmod
MODPROBE=/sbin/modprobe

EXTIF="eth0"
INTIF="eth1"
#INTIF2="eth0"
echo " External Interface: $EXTIF"
echo " Internal Interface: $INTIF"

#==========================
#== No editing beyond this line is required for initial MASQ testing ==
echo -en " loading modules: "
echo " - Verifying that all kernel modules are ok"
$DEPMOD -a
echo "----------------------------------------------------------------------"
echo -en "ip_tables, "
$MODPROBE ip_tables
echo -en "nf_conntrack, "
$MODPROBE nf_conntrack
echo -en "nf_conntrack_ftp, "
$MODPROBE nf_conntrack_ftp
echo -en "nf_conntrack_irc, "
$MODPROBE nf_conntrack_irc
echo -en "iptable_nat, "
$MODPROBE iptable_nat
echo -en "nf_nat_ftp, "
$MODPROBE nf_nat_ftp
echo "----------------------------------------------------------------------"
echo -e " Done loading modules.n"
echo " Enabling forwarding.."
echo "1" > /proc/sys/net/ipv4/ip_forward
echo " Enabling DynamicAddr.."
echo "1" > /proc/sys/net/ipv4/ip_dynaddr
echo " Clearing any existing rules and setting default policy.."

iptables-restore <<-EOF
*nat
-A POSTROUTING -o "$EXTIF" -j MASQUERADE
COMMIT
*filter
:INPUT ACCEPT [0:0]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
-A FORWARD -i "$EXTIF" -o "$INTIF" -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT
-A FORWARD -i "$INTIF" -o "$EXTIF" -j ACCEPT
-A FORWARD -j LOG
COMMIT
EOF

echo -e "nrc.firewall-iptables v$FWVER done.n"