linux下设置ftp服务(vsftpd)的实例参考

发布时间:2020-02-05编辑:脚本学堂
本文介绍下,在linux系统中设置ftp服务的方法,这里使用vsftpd软件,有需要的朋友参考下。

本节内容:
linux系统中设置ftp服务

具体操作步骤如下:
1,设置vsftpd,默认linux下安装自带vsftpd,在命令行下运行setup 找到network setup选中vsftpd 属性;
 
2、修改配置 /etc/vsftpd/vsftpd.conf
 

# Example config file /etc/vsftpd/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
# Please see vsftpd.conf.5 for all compiled in defaults.
# site: www.jb200.com
# READ THIS: This example file is NOT an exhaustive list of vsftpd options.
# Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
# capabilities.
#
# Allow anonymous FTP? (Beware - allowed by default if you comment this out).
anonymous_enable=NO
#
# Uncomment this to allow local users to log in.
local_enable=YES
#
# Uncomment this to enable any form of FTP write command.
write_enable=YES
#
# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
local_umask=022
#
# Uncomment this to allow the anonymous FTP user to upload files. This only
# has an effect if the above global write enable is activated. Also, you will
# obviously need to create a directory writable by the FTP user.
anon_upload_enable=NO
#
# Uncomment this if you want the anonymous FTP user to be able to create
# new directories.
anon_mkdir_write_enable=NO
#
# Activate directory messages - messages given to remote users when they
# go into a certain directory.
dirmessage_enable=YES
#
# The target log file can be vsftpd_log_file or xferlog_file.
# This depends on setting xferlog_std_format parameter
xferlog_enable=YES
#
# Make sure PORT transfer connections originate from port 20 (ftp-data).
connect_from_port_20=YES
#
# If you want, you can arrange for uploaded anonymous files to be owned by
# a different user. Note! Using "root" for uploaded files is not
# recommended!
#chown_uploads=YES
#chown_username=whoever
#
# The name of log file when xferlog_enable=YES and xferlog_std_format=YES
# WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
#xferlog_file=/var/log/xferlog
#
# Switches between logging into vsftpd_log_file and xferlog_file files.
# NO writes to vsftpd_log_file, YES to xferlog_file
xferlog_std_format=YES
#
# You may change the default value for timing out an idle session.
#idle_session_timeout=600
#
# You may change the default value for timing out a data connection.
#data_connection_timeout=120
#
# It is recommended that you define on your system a unique user which the
# ftp server can use as a totally isolated and unprivileged user.
#nopriv_user=ftpsecure
#
# Enable this and the server will recognise asynchronous ABOR requests. Not
# recommended for security (the code is non-trivial). Not enabling it,
# however, may confuse older FTP clients.
#async_abor_enable=YES
#
# By default the server will pretend to allow ASCII mode but in fact ignore
# the request. Turn on the below options to have the server actually do ASCII
# mangling on files when in ASCII mode.
# Beware that on some FTP servers, ASCII support allows a denial of service
# attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
# predicted this attack and has always been safe, reporting the size of the
# raw file.
# ASCII mangling is a horrible feature of the protocol.
ascii_upload_enable=YES
ascii_download_enable=YES
#
# You may fully customise the login banner string:
#ftpd_banner=Welcome to blah FTP service.
#
# You may specify a file of disallowed anonymous e-mail addresses. Apparently
# useful for combatting certain DoS attacks.
#deny_email_enable=YES
# (default follows)
#banned_email_file=/etc/vsftpd/banned_emails
#
# You may specify an explicit list of local users to chroot() to their home
# directory. If chroot_local_user is YES, then this list becomes a list of
# users to NOT chroot().
#chroot_list_enable=YES
# (default follows)
#chroot_list_file=/etc/vsftpd/chroot_list
#
# You may activate the "-R" option to the builtin ls. This is disabled by
# default to avoid remote users being able to cause excessive I/O on large
# sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
# the presence of the "-R" option, so there is a strong case for enabling it.
#ls_recurse_enable=YES
#
# When "listen" directive is enabled, vsftpd runs in standalone mode and
# listens on IPv4 sockets. This directive cannot be used in conjunction
# with the listen_ipv6 directive.
listen=YES
#
# This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
# sockets, you must run two copies of vsftpd whith two configuration files.
# Make sure, that one of the listen options is commented !!
#listen_ipv6=YES
 
pam_service_name=vsftpd
userlist_enable=NO
tcp_wrappers=YES
#平均上传下载速度
Local_max_rate = 204800
#最大的并发数
Max_clients=300
reverse_lookup_enable=NO
 

3、修改 /etc/vsftpd/userlist   删除所有其他用户,增加要创建的ftp用户
 

复制代码 代码示例:
# If userlist_deny=NO, only allow users in this file
# If userlist_deny=YES (default), never allow users in this file, and
# do not even prompt for a password.
# Note that the default vsftpd pam config also checks /etc/vsftpd/ftpusers
# for users that are denied.
ftpuser
 

4、新增ftp用户操作,只能作为ftp用户访问,不能进行telnet登录
1、不指定路径,默认为/home/ftpuser  佛山默认,不指定用户路径
 

复制代码 代码示例:
#adduser -g ftp -s /sbin/nologin ftpuser
 

2、指定路径
 

复制代码 代码示例:
#adduser -d /fs_sqt/chatserver/files -g ftp -s /sbin/nologin ftpuser
 

5、修改DNS解析的配置文件(修改前先备份)
/etc/resolv.conf
清空此文件的内容。

6、重启ftp命令,都可以启动
 

复制代码 代码示例:
1、#/etc/init.d/vsftpd restart
2、#service /etc/vsftpd restart
 

7、访问FTP,进行测试
 ftp://192.168.2.1
提示输入用户名与密码,登录进去,开始文件的上传下载吧。

>>> 相关阅读:
vsftpd配置启动方式为xinetd的方法
vsftpd中修改上传目录的方法
使用vsftpd安装与架设ftp服务器的方法
ubuntu下搭建vsftpd服务器的案例分享
vsftpd被动模式的配置参考
vsftpd安装及虚拟用户认证的配置方法
vsftpd设置与常用命令说明
ubuntu vsftpd虚拟用户配置
vsftpd配置虚拟用户的方法介绍
vsftpd虚拟用户创建实例
vsftpd 配置十则
ubuntu下安装vsftpd
centos vsftpd 安装配置详解
vsftpd 安装配置详细教程
我的vsftpd安装笔记
vsftpd.conf详解与vsftpd实例配置
vsftpd.conf配置文件难点分析